AIMPOINT COMPM4
$820.00
Aimpoint CompM4S Official US Army Red Dot Sight 30mm Tube 1x
(Pre-Owned FMC)
Out of stock
Description
TECHNICAL SPECIFICATIONS
| GENERAL SPECIFICATIONS |
|---|
| Item No.: 11972 |
| OPTICAL SPECIFICATIONS |
|---|
| Operating principle: Reflex Collimator sight with LED |
| Optical magnification: 1x |
| Aiming dot size: 2 MOA |
| Dot intensity: Visible against a background luminance of 0,1 to 55 000 lx |
| Optical signature: No optical signature is visible at 10 meter distance, front side, on appropriate settings with NVD |
| Dot color: Peak Wavelength: 655 ± 15 nm |
| NVD compatible: Yes |
| Optical coating: Anti-reflex, all surfaces and multi-layer. NVD-Compatible 1, 2, 3 |
| Clear aperture: 23 mm (.9 in) |
| Eye relief: Unlimited |
| POWER SOURCE |
|---|
| Battery type: AA size battery, (rechargeable 1.2V), alkaline/lithium 1,5V or lithium 3-3,7V (acceptable voltage 1,2-5volt) |
| Battery life – Day time use: 80.000 h continuous (pos. 12 of 16). Responds to >500 000 hours at NVD setting (pos. 4) |
| Power intensity: 7 NVD and 9 Daylight, of which 1 extra bright |
| PHYSICAL SPECIFICATIONS |
|---|
| Length sight only: 120 mm (4.7 in) |
| Length conf: 135 mm (5.3 in) |
| Width sight only: 72 mm (2.8 in) |
| Height sight only: 60 mm (2.4 in) |
| Height conf: 72 mm (2.8 in) |
| Weight sight only (incl battery): 268 g (9.4 oz) |
| Weight conf: 376 g (13.3 oz) incl. Lens Covers, Kill-Flash, Mount, and Spacer |
| Housing material: High Strength Aluminum |
| Housing finish and color: Matte black |
| Housing anodized: Yes |
| Material mount and spacer std conf: High Strength Aluminum |
| Surface treatment: Hard anodized, matte |
| Height of optical axis – sight and mount: 30 mm (1.2 in) over top surface of Picatinny/Weaver Rail |
| Height of optical axis – sight, mount and low spacer: 39 mm (1.5 in ) over top surface of Picatinny/Weaver Rail |
| Adjustment: Range ±2 m at 100 meters (±2 yds at 100 yds) in windage and elevation, 1 click = 16 mm at 100 meters = 13 mm at 80 meters = .6 in at 80 yds |
| ENVIRONMENTAL SPECIFICATIONS |
|---|
| Temperature range operation: -45°C to +71°C (-49°F to +160°F) |
| Temperature range storage: -51°C to +71°C (-60°F to +160°F) |
| Temperature shock: Operable after a temperature shock between -45°C and +71°C (-49°F and +160°F) |
| Humidity: Operable during and after Humidity. Limits: RH: 95%, Temp: +20°C to +50°C (+68°F to +122°F), cyclic |
| Submersible: To a depth of 45 m (150 ft.) |
| Shock: Withstands shock. Limits: X-axis: 500 g, 0.7 – 1.1 ms (3 shocks), Y-axis: 40g ±4g, 11 ±1ms (2 shocks in each direction, Z-axis: 40g ±4g, 11 ±1ms (2 shocks in each direction). |
| Vibration: Withstands Vibration. Limits: Vibration, sinusoidal in a frequency range of 10-150 Hz. Frequency: 10-30 Hz, ±1.587 mm, Frequency: 30-150 Hz. 5.75 g, 1 octave/min. Direction: X, Y and Z, Time: 30 min/direction. |
| Chemical resistance: Withstands occasional contamination by weapons cleaners, lubricants, fuels and insect repellents. |
UNIQUE FEATURES
- High battery compartment
- Compatible with every generation of NVD
- ACET technology allows up to 80,000 hours (over 8 years) of daytime operation on one AA battery
- Internal voltage regulator allows the CompM4 to be used with any AA size battery
- 7 NVD settings and 9 daylight settings
- QRP2 mount has twice the clamping force of the original QRP, and the mounting knob is wider and shorter to improve operation and lower the risk of snagging on other gear
- Mount base is keyed into to the body of the sight to absorb recoil
- Mount base screws directly into the sight – no separate sight ring required.
- 500,000 hours of use on NVD setting
- 2 MOA dot for close combat and long distance engagement
- Matches perfectly with Aimpoint® 3XMag
- Unequalled light transmission
- Front lens opening is threaded for addition of killFlash® anti-reflective device
- Submersible to 150 feet (45 meters)
- Vertical spacer included
- Type classified as the U.S. Army’s new M68CCO
- Improved adjustment caps are easier to remove and protected against impact
- Can be used with a carry handle adapter for use on all M16 rifles
- Mechanical switch for speed and reliability
